Lithgow LA105 Woomera Review: Accuracy, Specs and Price

Last updated on October 2nd, 2026

This Lithgow LA105 Woomera review is based on my own 6.5 Creedmoor rifle, factory match ammunition and recorded 100m groups. My best documented three-shot groups with Norma 130gr Golden Target measured 0.275in and 0.631in. Those are real results from this rifle, not a manufacturer claim or a result borrowed from another review.

I set the rifle up in its factory KRG X-Ray chassis with a Warne Skyline Lite bipod, TAB Gear sling and additional Picatinny sections, and I have also used it from a Two Vets tripod. The package is accurate, stable and very manageable in 6.5 Creedmoor, but its roughly 4.75kg bare weight makes its role clear: this is a supported precision rifle, not a light hunting rifle.

Quick verdict: the LA105 Woomera is a strong Australian-made precision package for a shooter who values real sub-MOA performance, a heavy 24in barrel, 20 MOA rail, 10-round AICS magazine and local support. The KRG X-Ray stock does not fold and the complete rifle is heavy, but those trade-offs help it remain settled on a bipod, bag or tripod.

Important Lithgow Muzzle-Brake Recall

Safety check: Lithgow Arms has recalled the older 6.5 Creedmoor and .308 factory muzzle brakes that use a clamp mechanism. Lithgow says the replacement Gen 2 brake with a locknut is not affected. If your brake uses the recalled clamp design, stop using the brake and follow Lithgow’s replacement or refund process.

The recall warns that an affected brake can allow projectile contact with an internal baffle, creating fragments or an unexpected point-of-impact deviation. This is not a cosmetic notice. Inspect the brake design and use Lithgow’s official recall page or contact details if there is any uncertainty. I am not identifying the status of a brake from a photograph.

My LA105 Woomera Test Setup

The configuration is intentionally straightforward. The bipod handles prone and bench support, the sling makes the heavy rifle easier to move, and the tripod gives another stable position without altering the core rifle. I have not added weight simply to imitate a competition build because the Woomera is already substantial.

Lithgow LA105 Woomera Specifications

Lithgow lists an overall length of 1106mm with thread protector and no butt spacer, or 1148mm with the factory brake. Three 9.5mm recoil-pad spacers are supplied. The barrel, receiver and rail use a black Cerakote finish, and the current package includes a polymer magazine-release extension and Harris-style sling stud.

The figures above are current manufacturer specifications checked in August 2026. Older manuals may round the barrel to 607mm or the rifle weight to 4.9kg. Use the current product page and the exact rifle for cases, mounts and transport planning.

Accuracy: My 100m Groups

The most useful evidence in this review is on the targets. With Norma 130gr Golden Target factory ammunition, my Woomera produced a 0.275in three-shot group and a separate 0.631in three-shot group at 100m. Both are comfortably below one MOA and show that this rifle and load can shoot exceptionally well when the position and conditions cooperate.

A three-shot group does not prove that every future group will measure the same, and the 0.275in result should not be advertised as the rifle’s guaranteed accuracy. It proves that the rifle, ammunition and setup were capable of that result. A more complete long-term average would require multiple groups recorded under the same method.

I also used Hornady match ammunition during the test period. The two photographed group measurements are from the Norma ammunition.

Barrel, Recoil and Repeated Shooting

The 24in heavy barrel is a large part of the Woomera’s behaviour. It adds heat capacity and forward stability for repeated supported strings, while the 1-in-8 twist in my 6.5 Creedmoor is suited to the 130-147gr match-projectile range commonly used at distance. The .308 version uses a 1-in-10 twist.

In 6.5 Creedmoor, the rifle is one of the more manageable precision platforms I have used during faster strings. The mass and brake reduce movement enough to help maintain the sight picture and spot impacts. That is useful performance, but owners must first confirm that any factory brake is the non-recalled Gen 2 design.

The same mass becomes a disadvantage when the rifle must be carried far. A scoped Woomera with loaded magazine, bipod and sling moves well beyond 5kg. For a range, property or competition rifle that weight can improve stability; for steep walk-and-stalk hunting it is difficult to justify.

Three-Lug Action and 60-Degree Bolt

Lithgow uses a three-lug, front-locking bolt with a 60-degree opening, spring-loaded claw extractor and ejector. The short lift creates generous scope clearance and makes the cycling movement compact. A red indicator at the rear of the shroud shows when the rifle is cocked.

My action has fed reliably from the supplied 10-round steel AICS-pattern magazine, including when fully loaded. The double-stack/single-feed design presents each cartridge centrally. Reliable feeding from the actual magazine matters more than whether a catalogue simply says AICS compatible, so every spare should be tested before competition or field use.

The bolt is spiral-fluted and the handle provides enough leverage without requiring an oversized aftermarket knob. The action is not as light in feel as a small hunting rifle, but it suits the heavy precision package and has remained consistent in my use.

Trigger and Three-Position Safety

My factory trigger measured around 1.4kg. Lithgow specifies a 1.5kg factory setting and an approximate adjustment range from 0.75kg to 1.9kg, with adjustment for weight, sear engagement and overtravel. The break has been predictable enough that I have not needed an immediate aftermarket replacement.

The bolt-shroud safety has three positions: fire, safe with the bolt locked, and safe with the bolt free to open. The third position is useful when unloading because the chamber can be cleared while the trigger remains blocked. The manual warns that poor trigger adjustment can reduce reliability and safety, so work beyond the published owner procedure belongs with a qualified gunsmith.

KRG X-Ray Chassis in Use

The factory KRG X-Ray combines an aluminium backbone with polymer exterior panels. It gives the action a rigid support surface while keeping the grip and cheek contact more comfortable than exposed metal. The adjustable cheekpiece and spacer-based length of pull made it straightforward to align the rifle behind the optic.

M-LOK slots and KRG attachment points allow the forend to accept rails, sling hardware, barricade support and other accessories. I added a bottom Picatinny section for the Warne Skyline Lite bipod and a side point for my TAB Gear sling. Those changes solved specific mounting needs without replacing the chassis.

The X-Ray does not fold, which is the main stock limitation for transport. A shooter who needs a folding rear section can compare the KRG Whiskey-3 chassis, but the cost and finished weight should be considered before converting a rifle that already fits well.

Optic, Bipod and Tripod Setup

A rifle this stable can justify a capable long-range optic, but mounting still begins with cheek weld and ring height. The 20 MOA rail provides useful elevation bias, while the 60-degree bolt offers generous ocular and ring clearance. The optic should have repeatable tracking, a reticle the shooter can actually use and enough elevation for the intended distance.

Use the long-range rifle scope guide and scope-ring guide to plan the system. You can also check current Warne mount and bipod options. This affiliate link may earn PrecisionRifle a commission at no extra cost to you.

The Warne bipod has been the simple prone solution on my rifle. For positional support, the Two Vets QDT V2 tripod review covers the tripod used with the Woomera. The precision rifle bipod guide compares other support options.

6.5 Creedmoor vs .308 Woomera

My direct results apply to the 6.5 Creedmoor rifle. The Norma group sizes should not be transferred across chamberings: recoil, twist, ammunition and barrel behaviour differ.

The calibre selection guide covers the broader decision. For either Woomera, availability of suitable factory match ammunition and the amount of practice the owner can afford matter more than arguments about theoretical maximum range.

Lithgow Woomera vs Tikka T3x TACT A1 and Ace Target

The Woomera is the more convincing choice when the owner wants an Australian-made heavy precision rifle and likes the X-Ray chassis. The Tikka T3x Ace Target is the more modern factory competition interface, while the TACT A1 offers folding transport. Read the Tikka T3x model guide before comparing prices because a Lite or CTR is not a direct equivalent.

The Howa 1500 review covers a lower-cost action and package direction. The Sako TRG 22 A1 review covers a substantially more expensive professional precision platform. The Woomera sits between those decisions as a complete Australian range rifle.

LA105 Woomera Price and Warranty

The earlier version of this review recorded Australian retail around $3,600 AUD when it was written. Treat that as dated context, not a current quote. The original 2019 launch coverage was closer to $2,800, which shows why an old search result is not a safe buying budget.

Ask a licensed dealer for the current price and confirm whether the quote includes the brake, magazine and any signature-edition finish. Also check used rifles for the muzzle-brake recall status and obtain the original proof of purchase where possible.

Lithgow announced a transferable 10-year manufacturer warranty for LA105 rifles, subject to registration, proof of purchase and transfer requirements. Read the current warranty terms rather than assuming every second-hand rifle automatically carries the same coverage.

Maintenance and Accuracy Checks

1. Clean before first use: Lithgow says the rifle is proofed and factory-tested and does not require a special break-in, but recommends cleaning before use.
2. Check the brake: identify whether it is the recalled clamp design or the unaffected Gen 2 locknut version.
3. Use the manufacturer torque: Lithgow currently specifies 7Nm / 62in-lb for LA105 action screws in its troubleshooting guidance.
4. Check the rail and rings: follow Lithgow and optic-maker torque guidance, then witness-mark fasteners if appropriate.
5. Test factory match ammunition: record several groups with the same method before diagnosing an accuracy problem.
6. Retain evidence: photograph targets, ammunition boxes and setup details if support is required.

Lithgow directs owners with a malfunction or warranty concern through a local firearms dealer. Trigger, safety, chamber or muzzle problems are not the place for improvised modifications.

Lithgow LA105 Woomera Pros and Cons

Who Should Buy the LA105 Woomera?

• Strong fit: an Australian range shooter who wants a complete heavy precision rifle and values local manufacture.
• Strong fit: a 6.5 Creedmoor shooter who wants low recoil, a stable chassis and repeatable supported performance.
• Compare first: a PRS-style buyer who may prefer the integrated ARCA and newer controls of a T3x Ace Target.
• Look elsewhere: a hunter who must carry the rifle long distances or wants a compact folding package.
• Used-buyer priority: confirm muzzle-brake recall status, warranty paperwork and magazine function before price.

Lithgow LA105 Woomera FAQ

How accurate is the Lithgow Woomera?

My 6.5 Creedmoor rifle produced documented 0.275in and 0.631in three-shot groups at 100m with Norma 130gr Golden Target. Those results show excellent capability but should not be treated as a guarantee for every rifle, load or group.

How much does the LA105 Woomera weigh?

Lithgow lists 4.75kg without scope, magazine or brake, 4.9kg with the brake, and 5.1kg with an empty magazine and brake. A scoped field setup will be heavier.

What is the current Lithgow Woomera price?

Price varies by dealer, stock and edition. This article previously recorded about $3,600 AUD, but that is dated. Obtain a current written quote for the exact rifle.

Is the Woomera muzzle brake recalled?

Older Lithgow brakes using a clamp mechanism are subject to the recall. The replacement Gen 2 brake with a locknut is not. Use Lithgow’s recall page to identify the correct action.

Is the Woomera better than a Tikka T3x TACT A1?

The Woomera offers Australian manufacture, a KRG X-Ray chassis and strong first-hand accuracy here. The TACT A1 offers a folding chassis and the wider T3x ecosystem. Ace Target adds a newer competition interface. The intended use and complete local price should decide.

Does the Woomera use AICS magazines?

Yes. Lithgow specifies a removable 10-round steel AICS-pattern magazine with double-stack/single-feed layout.

Watch my Lithgow LA105 Woomera range video for the rifle and setup shown in use.